Bolt-In Rear Coil-Over Conversion

gm_a-body_assembled_viewAldan American expands their growing line of bolt-in suspension applications for 1964-1972 GM A Body vehicles. The GM A Body chassis covers a wide range of GM muscle cars. Most A Body cars like the Chevelle, GTO, Skylark & 442 were designed with basic, passenger car suspension setups from the factory. Aldan American’s new, rear coil-over conversion kits replace the rear factory shocks & springs with ride-height adjustable coil-overs. Aldan offers several options for street performance & racing use.

Aldan coil-over kits will allow you to lower your vehicle, improve ride quality & handling as well as maintain the integrity of your classic. Aldan’s 100% bolt-on kit is designed for easy installation using basic hand tools – eliminating drilling, cutting & welding. Aldan kits ship complete with single or double adjustable coil-over shocks, high travel coil-springs, CNC laser cut & TIG welded bracketry along with all of the hardware needed to bolt this application onto your rear end. Every component in the Aldan kit is 100% Made in the U.S.A.

Comments
  • (will not be published)

11 Responses to “Bolt-In Rear Coil-Over Conversion”

  1. Wayne Bent
    Wayne Bent

    Would these be able to fit on a 1986 El Camino. If they do can I buy them in Canada. Thank you.

    Reply
    • Customer Service
      Customer Service

      Hi, Wayne. The Aldan American kit is designed for 1964-72 GM A-Bodies, so it will likely not fit your application.
      Although Detroit Speed (www.detroitspeed.com) makes a Great coil-over kit fro your ride!

      Reply
  2. Rick Kofler
    Rick Kofler

    I have a 1971 Cutlass, I am replacing the rear end to handle the 575 hp and 640 # of torque. I was thinking about installing air shocks as the tires are 50 series and may still rub on the inner fender.(I had the new axle narrowed 6″.) Do you recommend these new coil over conversions as an option for my application.
    Thank you,
    Rick

    Reply
    • Customer Service
      Customer Service

      Hi, Rick. Given the BIG torque your ride will generate these may be a good solution for you when combined with stiffer springs and aftermarket trailing arms. The folks in the Tech department at Aldan American should be able to assist you in making some sound decisions. Visit: http://www.aldanamerican.com

      Reply
    • Customer Service
      Customer Service

      Hi, Frank. The hot rodder in me says anything can be made to work, but in reality it may not be the best choice of components. That’s not to say the folks at Aldan American can’t help you out, I would encourage you to visit their site (www.aldanamerican.com) and use their technical support to discover if they have a better solution for your ride.

      Reply
    • Customer Service
      Customer Service

      Philip,

      Unfortunately, they do not currently offer anything for your year and model.

      Wrench Safely!

      Reply