Iridium Performance Spark Plugs

Performance Spark Plugs

With over four decades of experience in designed and manufacturing high output ignition systems, it should be no surprise to learn that MSD is introducing a line of performance spark plugs! MSD’s new Iridium Spark Plugs are engineered and designed to be used on high performance, high output street engines.

MSD used their involvement in NASCAR to define high rpm endurance while reviewing the spark isolation requirements needed on plugs to fire an NHRA top fuel engine to create this new line of plugs from the ground up. The result of this high level experience in motorsports is a spark plug that is engineered to support power with long lasting performance for hot rods, modern muscle cars, trucks and SUV’s, as well as sport compact.

The point of interest of MSD’s spark plugs is the iridium tip and the yttrium copper enhanced ground strap. This combination is designed to handle the higher heat associated with performance engines and high output ignition systems. The ground strap has also been modeled to expose as much of the flame as possible to create complete combustion. Attention was also given to the proprietary ceramic material of the plug ensuring that the only path for spark was across the gap – not through the housing which is typical of inferior plugs.

The new MSD Iridium Spark Plug is available for a wide range of engines, applications and heat ranges.

  • Iridium tip assures an intense spark and improves cold starts.
  • Electrode is machined to expose more flame to the combustion chamber.
  • Proprietary ceramic blend ensures the most spark isolation
  • Reduced chance of pre-ignition with a yttrium enhanced ground electrode
  • Designed for long lasting performance even with high output ignition controls
  • Available for traditional hot rods, modern muscle cars and sport compact performance.
  • Share tips, start a discussion or ask one of our experts or other students a question.

    Make a comment:
    500 characters remaining

    9 Responses to “Iridium Performance Spark Plugs”

    1. George Dansby

      More info

    2. Jack

      Is there an interchange guide? Autolite 3924.

    3. Thomas Gencarelli

      Heat Ranges are critical in performance engines. I know what works well so a cross reference is needed. I have an MSD Pro Billet Distributir, cpil, wires snd the AL6 CD box... I would give the plugs a try!

    4. AL BARBIERI

      were to buy

    5. Richard Hartman

      I am Noticing in above picture that the electrode are not indexed to the ceramic insulator, wondering if they are indexed to the thread start on each plug to allow for corrected unshrouding of the electrode inside the combustion chamber.

    6. John Seale

      looking for the MSD interchange with ACCEL 0784 for a 1997 DOHC Plymouth Neon Expresso

    7. alfred improta

      will msd be offering an interchange with other manufacturers as ngk, autolite etc.

    8. Mel

      Will the wrong sparplug break the starter bell

    9. Ying

      Make a list of cars common to your area and look up any thing you think of that could go wrong with any one of them and start lonoikg. Otherwise ask. Boss to allow you to practice more when not busy with customers