Universal Brake System Builder Kit

Brake Plumbing

Get everything you need to plumb your brake system in one easy-to-order package with the Universal Brake System Builder Kit from Speedway Motors.

Speedway’s Universal Brake System Builder Kit comes complete with all the lines, valves, fittings, adapters and clips you need to set up a typical street rod or specialty vehicle brake system.

This includes:

  • 25-foot roll of 3/16-inch mild steel brake line
  • Dual outlet master cylinder brake lines
  • Six 60-inch long 3/16-inch brake lines
  • Wilwood proportioning valve
  • Residual valves (two 2psi and one 10psi)
  • Six 3/8-24 IFF to 1/8-inch NPT male straight adapters
  • Two 90-degree 3/8-24 IFF to 1/8-inch NPT male adapters
  • 3/8-24 IFF to #3 brake fitting
  • 3/8-24 IFF to 1/8-inch NPT female tee adapter
  • AN3 male to 1/8-inch NPT male adapter
  • Brake line tabs
  • Five 3/8-24 IFM thread nuts
  • 10 3/16-inch insulated line clamps
  • Why shop for dozens of individual components when one part number provides you the perfect starting point to get your stopping system plumbed in style. Check out your Speedway Motors catalog or visit SpeedwayMotors.com for full details on this great kit

    Share tips, start a discussion or ask one of our experts or other students a question.

    Make a comment:
    500 characters remaining

    3 Responses to “Universal Brake System Builder Kit”

    1. bill

      <strong> will it fit a 1966 austin healy sprite

    2. Thomas Fritsch

      Have a 1953 Caddy Convertible

    3. Dave Arksey

      Would like more info