Please select from the available subscriptions above
Select your membership plan and get our best restoration videos with 24/7 access to tips and techniques from our tech experts, automatic renewal and our ‘cancel anytime’ policy.
What is a plasma cutter? The plasma cutter has replaced the oxy-acetylene torch (gas axe), for many applications and has proven itself capable of making precise and intricate cuts even on thicker plate metals. Mark Simpson introduces us to the setup, safety, and function of this valuable shop tool.
Tags: Mark Simpson, plasma cutter safety, plasma cutter tips, Premium Videos, using a plasma cutter
Add the finishing touches to your full car floor installation with Craig Hopkins. He tells you that the plug welds don’t necessarily have to be ground down, but if you’re going to what tools to use. He uses a cut off wheel with a 3/8th wide rock and 3 inch angle grinder with a 36
Watch Now >>
Craig Hopkins teaches you how to sharpen a chisel on a bench grinder with ease in this video. To get a single edge chisel, you simply lay it on the stone and create a sharp edge and a cup.
Watch Now >>
Mark Oja goes into detail about car maintenance as well as certain areas on the classic car that are good jacking points. With the help of some fabulous visual examples, you will be able to locate and recognize places that are the safest and most dangerous for jacking up your classic car.
Watch Now >>
Craig Hopkins quickly teaches you how to use a clamp and a rubber mallet to remove an emergency brake cable from its holding in the floor of a car body.
Watch Now >>