• 5:18

    In this video, Brent Ackley and George Vondriska teach you how to replace an alternator on your classic car.

    Watch Now >>
  • Classic Car Tire Pressure Monitor Installation
    2:58

    George Vondriska teaches you how to install two types of tire pressure monitors that will help you save your classic car, your money and possibly even your life. These are quick, simple fixes that screw on to the valve stems of the tire that you can buy at almost any car store. See how easy…

    Watch Now >>
  • 2:25

    George Vondriska introduces you to the combination impact wrench and wheel torque extension, which ranges from 55 pounds of torque to 140 pounds of torque. You will learn how to get a perfectly consistent torque throughout by using a cross pattern technique.

    Watch Now >>
  • Tire Repair Made Easy
    5:19

    A flat tire can be a real pain and the time and money to have it fixed can be even worse, so George Vondriska shows you how to repair a flat without the hassle. If you follow his instructions and buy a simple tire plug repair kit, your classic car will be back on the road…

    Watch Now >>
  • 2:45

    If you have ever gotten a bolt stuck in your classic car, you want to know how to use an EASY OUT. Brent Ackley shows you the slow, deliberate process so you can avoid making the expensive and time-costly mistake of having to repair a broken bolt. See how this technique helps avoid the need to…

    Watch Now >>
  • 9:59

    Most people get oil changes regularly because it shows up in that neon light on the dashboard, but they often forget about changing the transmission fluid, filter and gasket. Fortunately, you will find the fluid and filter can be done simultaneously, which makes it a manageable process after an oil change. In this video, learn…

    Watch Now >>
  • 17:09

    You’re probably well aware that hearing a “clunk” sound when shifting your car into gear is never good, but did you know that it typically means you may need a U-Joint replacement? Brent Ackley discusses the bearings that are causing this problem and shows how to replace them.

    Watch Now >>
  • Replacing a Differential Gasket
    9:33

    Brent Ackley gives you step-by-step instructions for replacing a differential gasket on a 1966 Buick Skylark classic car. Although it may be a bit messy, you will want to know how to do this because the differential gaskets are what make the wheels go round.

    Watch Now >>
  • 2:20

    If you have zerks on your classic car, you should know that you’ll need to grease them whenever you complete an oil change. Sometimes they do not want to take the grease, so Brent Ackley recommends using zerk busters. See how helpful these handy helpers can be for classic cars. Zerk Busters can be found…

    Watch Now >>