• 2:39

    Classic Car Maintenance Tips: Priming the Oil Pump

    Brent Ackley teaches you how to prime the oil system on a 1956 Chevrolet 150, demonstrating each of the essential classic car maintenance tips and techniques you’ll utilize to get the system properly up and running. He shows you how to use an air wrench to get the oil spread evenly before dropping in a…

    Watch Now >>
  • Classic Car Maintenance Tips: Timing the Engine
    4:01

    Classic Car Maintenance Tips: Timing the Engine

    Brent Ackley teaches you how to correctly install a distributor into the engine of a 1956 Chevrolet 150, walking you step by step through the process and demonstrating the essential classic car maintenance tips and techniques you’ll need to utilize. He shows the proper method for opening the intake valves in order to drop in…

    Watch Now >>
  • 0:59

    Aligning Valve Cover Gaskets With Bolt Holes

    Very rarely do the gasket holes line up with bolt holes when you are replacing valve cover gaskets. Brent Ackley teaches a helpful trick to properly align these holes. Use this method to make sure you have a good seal.

    Watch Now >>
  • 2:44

    1977 El Camino Project Car

    Brent Ackley and George Vondriska have a new project to work on, a 1977 El Camino. Mechanically the El Camino is in good shape but the body is in poor shape. The body is what they plan to focus on. Brent and George will be providing lessons on how to work around the fact that you can’t readily find body parts…

    Watch Now >>
  • How to Install a Cold Air Intake for your Car
    14:13

    How to Install a Cold Air Intake for your Car

    Amir Rosenbaum teaches you the three aspects that you can utilize to add power to your car – fuel, spark and air. For a car’s performance, hot air is bad and cool air is good. Amir demonstrates how to install a cold air intake kit that adds 1% horsepower for every 10 degree drop in…

    Watch Now >>
  • 15:05

    Classic Car Engine Dress Up

    Cam Benty shows off a stunning 1968 327 Camaro and discusses how the car engine area underneath the hood can look even better. He previews all sorts of chrome parts, including valve covers, an air cleaner, spark plug wire holders and more, that will make your classic car engine really shine.

    Watch Now >>
  • 17:38

    Classic Car Clutch Replacement

    If you hit the gas and your classic car goes “vroom, vroom”, but you’re still not moving, it’s time for a clutch replacement. Brent Ackley and George Vondriska show you how to take out the drive shaft and unbolt a majority of the transmission on your car’s engine to remove and replace the clutch.

    Watch Now >>
  • 14:12

    Classic Car Engine Assembly

    Brent Ackley teaches you how to properly assemble a classic car engine at your own pace, with in-depth instructions for installing the crank and cam shafts, inserting the main oil bearings, assembling and removing the pistons and putting the timing cover on.

    Watch Now >>
  • Overview of the Rebuilt 350 Classic Car Engine
    4:06

    Overview of the Rebuilt 350 Classic Car Engine

    Brent Ackley gives you an overview of a rebuilt 350 4 Bolt Main classic car engine that can run pump gas and now has 325-350 HP. He starts by sending the engine to the auto shop for close cleaning, measuring, and overall renewal.

    Watch Now >>