• Brake Line Planning
    1:04

    Here’s a quick tip to help you plan out, measure, cut and bend brake lines for your car.

    Watch Now >>
  • 1:27

    Brent Ackley suggests using a windshield removal tool for windshield molding clips if your project includes removing molding that you intend to keep. He demonstrates how the tool is used. It’s quick and easy and there is no damage to the molding using this tool.

    Watch Now >>
  • 1:08

    Turning your home garage car lift into a table couldn’t be easier. George Vondriska and Brent Ackley show a simple idea for a great work surface. A great addition for your shop! 

    Watch Now >>
  • New Valve Covers and Engine Breather
    1:55

    New valve covers on the El Camino have resulted in a plumbing change. George Vondriska explains this change. In this case, the oil fill cap on the El Camino acts as an engine breather. Learn what you may need to know if you have some re-plumbing to do.

    Watch Now >>
  • 1:26

    Using a tablet in your shop in order to get information on auto repairs is very common. In this video, find out how to protect your tablet when working in the shop. George Vondriska recommends a product that works well.

    Watch Now >>
  • 3:16

    George Vondriska and Brent Ackley give you a brief rundown of the 1956 Chevrolet 150 that Brent brought into the shop for a complete auto repair. Before they get started on fixing up the classic car, the guys talk about some of the specifications of this model and discuss a few of the cost-effective ways

    Read more »

    Watch Now >>
  • 2:39

    Brent Ackley teaches you how to prime the oil system on a 1956 Chevrolet 150, demonstrating each of the essential classic car maintenance tips and techniques you’ll utilize to get the system properly up and running. He shows you how to use an air wrench to get the oil spread evenly before dropping in a

    Read more »

    Watch Now >>
  • 3:24

    Craig Hopkins covers the three types of welding basics. He teaches you how to stabilize, distance, and consistently push the bead in a lap weld. For a plug weld, you will learn to start outside the circle and bring it in just licking the edges. Lastly, the butt weld will teach you to move the

    Read more »

    Watch Now >>
  • 2:02

    Add the finishing touches to your full car floor installation with Craig Hopkins. He tells you that the plug welds don’t necessarily have to be ground down, but if you’re going to what tools to use. He uses a cut off wheel with a 3/8th wide rock and 3 inch angle grinder with a 36

    Read more »

    Watch Now >>