• 12:05

    Classic Car Restoration: Cut-Down Techniques

    Craig Hopkins gives you different tips and tricks to help cut down the metal on a classic car panel without damaging the base. You must make sure to push the metal over weld, rather than attacking it, to avoid tearing the base metal. You will also learn how to get spot welds out. Use this…

    Watch Now >>
  • How to Sharpen a Chisel
    1:04

    How to Sharpen a Chisel

    Craig Hopkins teaches you how to sharpen a chisel on a bench grinder with ease in this video. To get a single edge chisel, you simply lay it on the stone and create a sharp edge and a cup.

    Watch Now >>
  • 6:41

    Classic Car Quarter Panel Removal

    Craig Hopkins and Randy Bolig take you through a classic car quarter panel removal process. First, they outline with a black marker what they are going to cut out of a 1969 Dodge Dart. Then they use a torch and brush to get lead out of the car, which shows them exactly where to cut.…

    Watch Now >>
  • Project Car Buying Advice
    5:18

    Project Car Buying Advice

    Buying a car to restore may not be as stressful as looking for a new project car, but there are still important aspects to look for. Brent Ackley tells you what areas to examine to get the finished product you desire depending on how much money you want to spend and the amount of time…

    Watch Now >>
  • Classic Car Detailing: Cleaning the Engine Compartment
    2:39

    Classic Car Detailing: Cleaning the Engine Compartment

    Classic car detailing has never been easier! Brent Ackley and George Vondriska teach you how to clean the engine compartment on a 1956 Chevy 210. After a reasonable power wash, scuff sand, prime and paint, the engine compartment on your classic car should look ready for the showroom.

    Watch Now >>
  • 1:28

    Sheet Metal Shrinker/Stretcher For Your Classic Car

    A sheet metal shrinker/stretcher is perfect for any type of metal fabrication you need for your classic car, and it keeps the metal completely flat (without crimps). Mark Oja gives a brief demonstration on how the stretcher works and then shows you an example of a finished product.

    Watch Now >>
  • Classic Car Sanding Supplies in Your Shop
    2:10

    Classic Car Sanding Supplies in Your Shop

    Sanding is a critical step in adding an impressive paint job to your classic car, so you need the proper supplies in your shop. Cam Benty helps you choose what size blocks to use, how to build your own block and the functions of a powder can. A proper finish starts with the car sanding…

    Watch Now >>
  • 16:01

    How to Use a Bead Roller and Skates on Your Classic Car

    The Bead Roller is a handy tool that provides extra strength by adding ridges to your sheet metal. Mark Oja and Cam Benty demonstrate how to use a Bead Roller on your classic car to add a little extra flair and strength to any metal you have.

    Watch Now >>
  • Customize Your Own Classic Car With Sheet Metal Fabrication
    15:42

    Customize Your Own Classic Car With Sheet Metal Fabrication

    In this video, learn how to customize your own classic car! Sheet Metal Fabrication can be a useful and effective tool when you are looking to add customized exterior to your classic car. Mark Oja works on a rare, custom Blown Fiat and adds his own custom hood using sheet metal fabrication made from cheap…

    Watch Now >>