• 4:21

    Brent Ackley and George Vondriska teach you how to remove the old and tattered headliner in a 1956 Chevrolet 150 and replace it with a new liner. They walk you through the step-by-step process, demonstrating essential classic car maintenance techniques. You should wear a respirator and be careful not to get any of the dust

    Read more »

    Watch Now >>
  • 7:12

    George Vondriska and Brent Ackley teach you how to prepare a headliner for installation into a 1956 Chevrolet 150. They talk about the tools that you’ll need (tape measure, scissors, hammer, pneumatic staple gun, push tools and a heat gun), and demonstrate each of the essential classic car maintenance tips and techniques you’ll use.

    Watch Now >>
  • Installing a Headliner in Your Classic Car
    10:27

    Brent Ackley and George Vondriska walk you step-by-step through the process of installing a headliner in a 1956 Chevrolet 150, demonstrating each of the essential classic car maintenance tips and techniques that you’ll utilize. Brent lays out the equipment and tools that you need and highlights the important parts that you should pay particular attention

    Read more »

    Watch Now >>
  • 13:18

    In the next step of our 1967 Chevy Chevelle rebuild, it’s time to reupholster the bucket seats. Craig Hopkins gives tips along the way as he starts with disassembling the seats completely. After the seats have been reupholstered, Craig and Aaron work on reassembling them. Craig also starts work on the door panel. The car is coming

    Read more »

    Watch Now >>
  • 1:02

    In this video, it’s time to get the body on the Chassis. In one afternoon, the team puts the headliner and vinyl top on the car and also sets the glass in it.  Both the headliner and top are original materials which really make the car look sharp!

    Watch Now >>
  • 4:25

    Craig Hopkins help you identify the spot welds on the car floor and draw a pattern to avoid cutting anything out of the car that shouldn’t be removed. You will learn how to draw a diagrams of where to cut, but make sure to take your time. Also, get a tip about seam sealer so

    Read more »

    Watch Now >>
  • Intro to Car Floor Installation
    5:23

    Craig Hopkins installs a full car floor on a Dodge Challenger just the way the factory would do it. You will learn how to properly support and level it on jack stands to keep the car from drooping on either end or in the middle. Also, make sure to put the floor in first then

    Read more »

    Watch Now >>