From Flatheads to Mustangs to MGB’s

I rebuilt my first engine – a flathead V-8 on a 1949 Ford in 1959 when I was 15 years old. I drove that car for five years, then selling it as a young adult. Cars were always a big interest of mine and I usually did my own routine maintenance and minor repairs.

Some of my favorite cars during my young adulthood included a ‘67 Mustang and a ‘68 British MGB. But because of a very busy career coupled with increasing electronic complexity of automobiles, I gradually got out of the habit of working on them.

In 1978, when I was 34 years old, I bought a running 1950 Ford from the original owner and restored the body and interior. I used it for a while as my business car but the heavy use was causing a good bit of maintenance – so I parked it for over 25 years. To my surprise, with minimal work, it started up in 2004 and I sold it to a young guy wanting to get started in the classic car hobby.

I retired young at the age of 47 and spent the first 13 years in remodeling a couple of houses, building another, and several landscaping projects.

In 1994, I traded a 1984 Starcraft popup tent trailer for a 1941 Ford-Fergeson tractor (the first year Ford offered a tractor). I got it running and used it with its box scraper to dress my quarter mile long driveway and to cut firebreaks on a small farm we lived on.

During my entire adult life, I attended every Classic Car show I could find.

In 2004, my interest in Classic Cars escalated and I got the idea of restoring Classic Cars as a part-time retirement business to build up enough funds for a big, first-class project that would be a keeper.

I bought a ‘68 Mustang that had a good body and interior, was cosmetically ugly due to faded paint, and needed mechanical work. I painted it in the original hot orange, I swapped somebody the barely-running 289 engine for a ‘69 Ford Boss 302 engine, re-cored the radiator, and got the brakes working.

I drove it as a 3rd fun car about a year and sold it for twice my investment.

In 2004, in a two month period, I bought two 1950 Fords and a 78 MGB. One of the ‘50 Fords was a beautifully customized car that I drove as a daily driver for several years. However, I had moved from the country to a city where I didn’t have room for my six vehicles and had started two more restorations, so I put it up for sale, making a 55% profit on it.

I had never entered it in a car show… the guy who bought it did and won a Best of Class, 2nd in Show, and 1st Place of Show all in the first month he owned it.

The other 50 Ford was a running partially done project. I finished it in a couple of months – when somebody I knew made an offer of three times what I had invested in it, so I sold it.

The 78 British MGB ran but had a bit of a tired engine. I took it on a 2,500 cross-country trip and decided something would eventually have to be done. First, however, I had it painted then I installed all new carpet, seat covers, and panels. Eventually, I bought a good used engine and overdrive transmission for it so I could keep using it as a daily driver while I started on a high-performance engine rebuild.

Once I pulled the engine and transmission on the 78 MGB, I bought a 70 MGB to use as my daily driver. When I was finished with the 78 B, I kept the 70 for a total of 10 years, selling it for a bit less than I’d for it… not at all regretting the slight loss.

I also bought several abandoned MG projects, kept thousands of dollars worth of parts for myself, then sold off the balance for a total net income of over $30,000 – putting the gains into a special bank account labeled “Barry’s Classic Cars.” Since my hobby was funded, my wife was extremely supportive as I didn’t raid our personal funds for my projects.

Meanwhile, I had bought a much larger home that was over 50 years old and in urgent need of remodeling. I worked on it several years, interleaving work on the 78 when time allowed.

I was also doing projects that were important to her: remodeling our house, landscaping the yards, modernizing our ancient swimming pool, building pergolas, bulding and repairing fences, installing a solar pool water heating system, fixing things that broke, planting trees and shrubs, growing vegetables, and pretty much everything else she asked for.

A happy wife makes for a happy life!

The 78 is finished – although I keep finding additional little projects for it.

I bought this original-owner 1978 MGB, (which I’ve now named ‘ZoooomB’), in Michigan from a couple who had used it as a 3rd summer fun car. It’s always been garaged and never driven on salted roads.

I have owned it for over 16 years and use it as a retired guy’s daily driver.

ZoooomB, who started with me as a nice-looking but exceptionally tired and unsporty little tourer (Britspeak for roadster or convertible) was maintained by the famous University Motors shop during her first 26 years of life (I have a thick packet of receipts).

As is obvious, I’ve made a few changes. It has a B-Series 5 main block. Everything else has been modified:

ENGINE DESIGN:

  • Engine has been designed as an integrated system over an initial 6-month research period followed by several years of additional modifications study & fabrication)
  • Built on a “whole systems” design concept which optimizes displacement, compression, internals strength, components balancing, fuel-air volume & flow, lift & dwell, distributor-cam tuning, spark duration & intensity, block cooling, overall heat dissipation, and exhaust pressure reduction
  • ENGINE INTERNALS:

  • Bored to 1900 cc (1950 is common; APT has gone safely to 2050)
  • Racing spec APT engine internals tested at 190,000 psi (pounds per square inch)
  • ARP fasteners
  • High compression 11:1 pistons
  • High-lift, long-dwell camshaft
  • Balanced crankshaft & flywheel
  • Heavy-duty oil & water pumps
  • ENGINE EXTERNALS:

  • Crossflow trialloy head
  • Oversized valves & springs
  • Sharpe roller rockers
  • Supplemental rocker oiling system
  • FUEL SUPPLY:

  • New fuel tank and pump
  • High-micron fuel filter from Summit Racing
  • Dual Weber DCOE 45 carburetors
  • Up to 880 cfm air-fuel intake
  • Cold air intake system
  • Dual oversized K&N air filters
  • Under car air rams to intake system
  • IGNITION SYSTEM:

  • High voltage DUI (Davis Unified Ignition) integrated coil-distributor
  • DUI distributor tuned by Performance Distributors to camshaft specs
  • Superconductive ignition LiveWires
  • Autolite racing plugs gapped at .055″
  • HEAT MANAGEMENT:

  • Oversize 19-row oil cooler
  • Aluminum racing radiator
  • Extensive heat dissipation systems
  • Dual hood vacuum exhaust ports
  • EXHAUST SYSTEM:

  • Exhaust manifold cooling shroud
  • Under car air ram to manifold
  • Dual thermostat-activated exhaust manifold cooling fans
  • Straight header
  • Flow-through exhaust
  • ENGINE COMPARTMENT:

  • Both dual-tone and air horns
  • Relocated oil filter
  • Oil thermostat for fast warmup
  • Engine compartment light bar
  • Polished stainless crash panel trim
  • Anti-vibration carbs cross bracing
  • Polished aluminum piping & bracing
  • Stainless hoses & some sleeving
  • DRIVETRAIN / SUSPENSION / WHEELS:

  • New front & rear springs
  • Lowered 2″ to early height
  • Proper rebound modifications
  • Prothane suspension bushes & pads
  • Heavy duty front and rear sway bars
  • Overdrive transmission
  • New brakes
  • Mini-lite style wheels (polished rims)
  • New narrow whitewall tires
  • INTERIOR:

  • All surfaces heat & sound insulated (firewall, floors, doors, rear cockpit)
  • New cut plush wool interior carpet
  • Upgraded black/red-piped panels
  • Upgraded black/red-piped upholstery
  • Pockets (seatbacks, panels, rear)
  • Bluetooth 8-speaker surround sound system with streaming & 128 Gb storage
  • Real rosewood dash/console ápplique
  • Solid rosewood door cappings and door pull mounts
  • Solid rosewood cup/phone holder
  • Moto-Lita steering wheel
  • Red/black MG Octagon badged chrome window cranks
  • Red/black MG Octagon badged walnut shift knob
  • Red/black-piped leather shift and emergency boot
  • Shift boot mounted overdrive switch
  • Underdash insulation panels
  • TRUNK:

  • Early-style MG Octagon chrome outline 3-piece trunk logo on outer trunk lid surface
  • New cut plush wool trunk carpet
  • Carpet on lid underside
  • Black & red tool and detailing bags
  • Black & red MG Octagon bag badges
  • Original jack, boot frame, & bag
  • Early-style MG Octagon chrome trunk logo on cut plush spare tire cover
  • Factory luggage rack
  • 70s black / leather-trimmed luggage
  • ELECTRICAL:

  • Fuse blocks (2) relocated to cockpit
  • Underdash & door lights
  • Rear cockpit area light
  • Electrical relays on most circuits
  • Halogen head lights
  • LED tail, marker, and other lights
  • High-intensity LED driving lights
  • Halogen fog lights
  • Numerous additional circuits
  • Override switches for some devices
  • Diagrams documenting changes
  • Extra underdash quick-connects
  • EXTERIOR:

  • Painted matching front/rear bumpers
  • Entire car repainted
  • Front/rear license chrome side lights
  • Badging to reflect modifications
  • MG Octagon keyed gas cap
  • WEATHER-PROOFING:

  • Matching red Haartz soft top
  • Refurbished matching red hard top
  • New rubber seals everywhere
  • Tonneau and top boot cover
  • Thick undercoating
  • Front/rear MG badged mud flaps
  • MUCH MORE…

    My next project is a 1973 MGB that I picked up for a song a couple of years ago. It’s in decent shape and I’ve already bought most of the parts for it.

    Classic Cars are fun to work on and drive… at 76 years old, I can also attest that they keep me young!

    Barry Barnes

    Share tips, start a discussion or ask one of our experts or other students a question.

    Make a comment:
    500 characters remaining

    2 Responses to “From Flatheads to Mustangs to MGB’s”

    1. Gary

      Barely running 289 for Boss 302 surely not even.

    2. David warr

      You are my kind of guy. I too love 50 Fords and MGBs. At 75 we are in the same generation but I tend to keep my cars forever.