• 32:22

    Mustang LED Taillight Conversion

    LED taillights have become commonplace on modern cars. Their added brightness and nearly bulletproof reliability have changed what we expect in automotive lighting. Thankfully manufacturers like United Pacific Industries saw the need to bring this revolution in lighting to the classic car enthusiast. Today we walk you through an LED taillight conversion to show how…

    Watch Now >>
  • 15:44

    Brake Master Cylinder: Bringing a Car Out of Long-Term Storage

    Classic cars that have been stored for years are notorious for having brake system failures, and when bringing a car out of storage it’s important to examine the brake system components carefully before getting started. Signs of leaking, missing or wrinkled paint around brake components, and signs of corrosion on brake parts can all give…

    Watch Now >>
  • 17:59

    Cleaning Fuel System: Bringing a Car Out of Long-Term Storage

    Oftentimes when a classic car is put into storage, it isn’t done so properly. Rather than prepare the car to sit unused, it simply stopped being driven by the owner. This usually means the battery is still in place, the fluids are dirty and the fuel tank is partially full. To bring any car out…

    Watch Now >>
  • 13:42

    Replacing Classic Car Sway Bar Bushings

    The first patent on a sway bar and sway bar bushings design came in Canada by Stephen Coleman in 1919. There wasn’t much call for it on early pre-war cars, as stiff suspension and body roll were simply viewed as part of the driving experience. Following World War II, roads had improved, cars were faster,…

    Watch Now >>
  • 8:49

    Spin-On Oil Filter Conversion

    Oil filter conversion is one component of our classic cars to which we seldom give much thought. In fact, most cars even into the 1930s didn’t have oil filters, but rather a large oil plug on the oil pan that was used so that debris in the bottom of the pan could be fished out…

    Watch Now >>
  • 4:42

    Spot Welder Setup and Safety Tips

    When it comes to welding sheet metal, we often think of MIG or TIG welding or even gas or stick welding, but the spot welder is equally as useful and a great addition to any restoration shop. Mark Simpson demonstrates the basic setup and discusses common safety tips and procedures.

    Watch Now >>