• Universal Joint Socket
    1:05

    Controlling sockets when using universal joints can be challenging. Here is a great little tip to help you maintain control.

    Watch Now >>
  • 1:33

    When restoring a classic car sometimes you’ll need to get a nut in a difficult to reach spot. Mark Simpson shares this great tip to help get you out of those tight situations.

    Watch Now >>
  • 2:28

    Hammer forming sheet metal is one one of the oldest forms of metal fabrication known, Mark Simpson introduces us to the process and and the materials as we begin our air cleaner forming project.

    Watch Now >>
  • 14:24

    The first step in hammer forming metal, is planning out what forms will be needed to get the job done. Mark Simpson takes us through the process of designing patterns and preparing to cut out the form and clamp.

    Watch Now >>
  • 42:35

    Using basic hammer forming techniques, Mark Simpson transforms two flat pieces of aluminum into a custom air cleaner. Using this process virtually any sheet metal part can be recreated from patch panels to custom center consoles, there simply are no limits.

    Watch Now >>
  • 13:18

    In the next step of our 1967 Chevy Chevelle rebuild, it’s time to reupholster the bucket seats. Craig Hopkins gives tips along the way as he starts with disassembling the seats completely. After the┬áseats have been reupholstered, Craig and Aaron work on┬áreassembling them. Craig also starts work on the door panel. The car is coming…

    Watch Now >>