1976 Corvette & 1959 Mack

I’ve attached two of my classic car restoration projects.

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

Several years ago, I converted the 1976 Corvette to all-electric. Unless it’s raining, it’s my daily driver. I had a business restoring and modifying cars and this had been sitting around for about 15 years. I’d completed most of the bodywork and just couldn’t part the car out. Performance and restorations were “been there, done that”, so I decided to do something different.

In Jan., 2016 I made the first trip down the track at the Gainesville, FL Raceway. I launched the car in 3rd gear (BW T-10) and smoked the tires. I decided to modify the car for autocross racing, but I needed a way to get it to the track. At first I looked at flatbeds, truck & trailer…etc., but it just didn’t feel right to haul an electric racecar to the track under gasoline or diesel power. So, I decided to build an all-electric towing vehicle; hence the 1959 Mack Model B.

OLYMPUS DIGITAL CAMERA 76-vette-3

For Mack purists, don’t worry. I’m not a hack. Unless you look close or don’t hear it following you, you won’t know it’s electric.

The Mack photos are not recent. Should be moving under its own power (not road worthy) in late December or early January. Road worthy should be Feb., 2017. First car show in April. And the paint scheme? A giant yellow 10,000lb Tonka Truck.

-Keith Stegath

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

10 Responses to “1976 Corvette & 1959 Mack”

  1. Mick

    <strong> I would be very interested in converting a 1993 Mustang to all electric. Where can I find the instructions and components for something like that? I would hate to flip a switch and my skeleton show up like in the cartoons.

  2. larry

    1976 Corvette daily driver unless it rains, you mean it shorts out in the rain, or you just don't trust the guys around you ...Mac.....oh, the future is here. I like dirty diesel to pollute the air. Or a cow farting is worse, all cows should take Beano.

  3. William

    Keith; Super impressed with your projects and the amount of effort and expense required to do two project of this size. I am a proud owner of a 2014 Tesla P85D with 56,000 miles, at a energy cost of less then $100. (photo cells and free Tesla superchargers) That car never ceases to thrill and amaze me every time I drive it. My projects consist of RV4 homebuilt aircraft, (working on) a 1948 Luscombe 11A sedan (waiting restoration), 1946 Luscombe 8E (flying), a 1958 Edsel Ranger restored to 1960's drag racing condition, and a 1958 Edsel Corsair (waiting). My problem is at 74, I no longer have the stamina to complete projects in a timely manner .

  4. Richard Lewis

    An amazing amount of work on these vehicles. Are you going into the conversion business ?

  5. David Moreland

    I think that it's great that you are doing a electric Mack! I would like to do the same to a 46 Chevy truck that I have. Could you send me pic and info on where you got your electric parts from and maybe an idea of what kind of budget I'm going to need to pull this off.

  6. Sgilmartin

    How can I follow your electrification project?

  7. Dennis

    The "Vette" is different in a cool way, but the Mack is El Bizzaro different. What kind of trip distance do expect to get for a beast that big?

  8. Philippe Camois

    I am from France and an old Classic American cars lover since, well, ever ! I owned 38 different cars from the 50s, 60s and 70s. Now I'm retired, but I still have a '77 Dodge Van B300 and I'm about to start the restoration of a '51 Ford Vedette (car made in France by Ford SAF) which has the look of a '49 Mercury, only a bit smaller. I didn't decide yet but I'm contemplating electric power for this car and I'd be very gratefull to get some adresses of business selling the equipment to do the conversion. Thanks in advance for your reply. Sincerely, PhC

  9. greg

    How did you go about finding all the info and products required to build that vet? Greg

  10. Chuck

    Love the design! It appears you are using lead acid batteries, doesn't that add a lot of weight to the front end? On the Mack, what kind of range are you hoping to get and how many batteries will you use? Please update as you build this rig! I would love to learn more about it!!