Often car enthusiasts are faced with trying to replicate the OE brake hose assembly. The most common solution is to use adapters on a “universal” #3 JIC brake hose. This approach is cumbersome, looks unprofessional, and introduces unnecessary leak points. BrakeQuip has developed an innovative solution for brake plumbing challenges that are encountered when modifying, restoring, or building custom vehicles. With a custom BrakeQuip hose, there’s no settling for anything less than OE quality. Ensure that you’ll have exactly what you need.
BrakeQuip provides
- Hundreds of OE-style loose fittings
- Bulk DOT-compliant rubber and 5 colors of stainless steel brake hose
- Any desired brake hose length, crimped with the right fittings for a perfect OE fit
- Every brake hose assembly is pressure tested to 3,000 psi
To find an authorized BrakeQuip dealer near you, visit www.brakequip.com/find-a-dealer. Now you can have the exact brake hoses you need for your next project build.
Looking for front brake hoses for 1952 Hudson Hornet NOS or NOS style with shoulder not groove with C clip. I can send photo of what I mean.
Can you please supply front brake hoses for a 1950,s Austin A30 fitted with 8 inch drums ( was originally 7 inch drums )
Hi and to whom it may concern, I have a 1951 Bentley MKVI in which i require rear suspension lubrication hoses..Are you able to assist... 0414986264
Awesome site
Folks, can you supply vintage look brake hoses with 3AN fittings?
HAVE YOU CATALOG FOR PARTS TO MAKE (press) BRAKE HOSE
i need a tee thats on the back of a 1936 oldsmobile i need the tee on the back of mastercylinder of 1936 oldsmobile
front brake hoses for 1968 galaxie 500 (discs) 5.0 litre
I have old fittings of brake hoses. If I send them you,can you add the rubber or what is best,the rubber is no good. Thank you.
cool