Universal Brake System Builder Kit

By CCRC Editors

Brake Plumbing

Get everything you need to plumb your brake system in one easy-to-order package with the Universal Brake System Builder Kit from Speedway Motors.

Speedway’s Universal Brake System Builder Kit comes complete with all the lines, valves, fittings, adapters and clips you need to set up a typical street rod or specialty vehicle brake system.

This includes:

  • 25-foot roll of 3/16-inch mild steel brake line
  • Dual outlet master cylinder brake lines
  • Six 60-inch long 3/16-inch brake lines
  • Wilwood proportioning valve
  • Residual valves (two 2psi and one 10psi)
  • Six 3/8-24 IFF to 1/8-inch NPT male straight adapters
  • Two 90-degree 3/8-24 IFF to 1/8-inch NPT male adapters
  • 3/8-24 IFF to #3 brake fitting
  • 3/8-24 IFF to 1/8-inch NPT female tee adapter
  • AN3 male to 1/8-inch NPT male adapter
  • Brake line tabs
  • Five 3/8-24 IFM thread nuts
  • 10 3/16-inch insulated line clamps

    • Why shop for dozens of individual components when one part number provides you the perfect starting point to get your stopping system plumbed in style. Check out your Speedway Motors catalog or visit SpeedwayMotors.com for full details on this great kit

    Make a comment
    • (will not be published)

    5 Responses to “Universal Brake System Builder Kit”

      • Customer Service

        Hi Bill,
        Thanks for your patience here is the response to your question.
        Perhaps, You’ll need to double check your brake line fitting sizes and types and compare them to the fittings in this kit.
        Wrench Safe
        Mark
        Classic Car Restoration Club Video Membership

        Reply