George Vondriska teaches how to use a pressurized device to test the performance of your classic car’s radiator system and radiator cap to prevent the parts from leaking. Also see how this technique prevents the engine of your classic car from overheating.
If you hit the gas and your classic car goes “vroom, vroom”, but you’re still not moving, it’s time for a clutch replacement. Brent Ackley and George Vondriska show you how to take out the drive shaft and unbolt a majority of the transmission on your car’s engine to remove and replace the clutch.Watch Now >>
Classic Car restoration is an exciting and hard working project. In this video, Brent Ackley shows you how to approximately position the points on a classic car’s engine, safely use the dwell meter and adjust the points for the perfect distance. One of the techniques can be done individually while the other needs a partner.Watch Now >>
Amir Rosenbaum teaches you the three aspects that you can utilize to add power to your car – fuel, spark and air. For a car’s performance, hot air is bad and cool air is good. Amir demonstrates how to install a cold air intake kit that adds 1% horsepower for every 10 degree drop in…Watch Now >>