Classic Car restoration is an exciting and hard working project. In this video, Brent Ackley shows you how to approximately position the points on a classic car’s engine, safely use the dwell meter and adjust the points for the perfect distance. One of the techniques can be done individually while the other needs a partner.
You Might Also Enjoy
-
8:09Replacing an Oil Pan Gasket
Nobody likes an oil drip! George Vondriska shows you how to reach and replace the oil pan on a 1977 Chevy 454. Before recording the video, he drained the oil from the pan and removed the filter to get access to the oil filter adapter. Use these helpful tips presented to replace the oil pan…
Watch Now >> -
17:09U-Joint Replacement For a Classic Car
You’re probably well aware that hearing a “clunk” sound when shifting your car into gear is never good, but did you know that it typically means you may need a U-Joint replacement? Brent Ackley discusses the bearings that are causing this problem and shows how to replace them.
Watch Now >> -
0:59Aligning Valve Cover Gaskets With Bolt Holes
Very rarely do the gasket holes line up with bolt holes when you are replacing valve cover gaskets. Brent Ackley teaches a helpful trick to properly align these holes. Use this method to make sure you have a good seal.
Watch Now >> -
4:09Compression Test For Your Classic Car
George Vondriska and Brent Ackley teach you step-by-step how to do a compression test for your classic car. They show how to check the compression of each cylinder whether you are by yourself or with a partner. After analyzing the range of your compression results, you will know whether your engine is in good condition,…
Watch Now >>
