MIG welders have made the process of welding metal easy for even the novice car builder, but before you turn on the welder make certain you’re aware how to safely use it. Metal fabricator Gary Simpson takes you through important MIG welding safety considerations, equipment and processes to ensure your time in the shop is enjoyable.
You Might Also Enjoy
-
1:46Intro to Front Sheet Metal Install and Necessary Car Parts
Craig Hopkins teaches you how to mount front sheet metals on a car to get rid of a rusty mess. He briefs you on the new car parts you will need such as a hood, fenders, and hinges. You do not need new hardware, but Craig suggests you buy it to save yourself future trouble.
Watch Now >> -
2:39Classic Car Detailing: Cleaning the Engine Compartment
Classic car detailing has never been easier! Brent Ackley and George Vondriska teach you how to clean the engine compartment on a 1956 Chevy 210. After a reasonable power wash, scuff sand, prime and paint, the engine compartment on your classic car should look ready for the showroom.
Watch Now >> -
3:30Trial Fitting on the Classic Car Quarter Panel
Since you will butt weld the new quarter panel to the roof and existing quarter panel, Craig Hopkins teaches you how to remove a quarter of an inch from the roof without cutting through the existing car quarter panel. Then, he’ll apply some weld through primer to the step you just created and rest the…
Watch Now >> -
9:12Classic Car Detailing: Polishing
Craig Hopkins uses a 3M polishing compound with a black foam pad to polish a classic car. and give it a stunning glass-like finish. Learn how to use Craig’s technique of barely brushing down on the edges to make sure you don’t cut the paint. Use these helpful car detailing tips today and see how…
Watch Now >>
Will not play.
Hello,
We have tested the video successfully. Please try clearing out your cache/internet history or try viewing on another browser and this should help fix the problem.
Thanks,
Becky
Classic Car Restoration Club Video Membership