Hose clamps have remained largely unchanged in design since nearly the dawn of the automobile. However, the Power Grip hose clamps provide a new twist on hose clamps, using a heavy gauge heat shrinkable material these clamps get the job done. Not only do they clamp well they adjust their tightness every time the engine get hot and won’t dig into your hoses like metal clamps will. Mark Simpson demonstrates how to install them and how to remove them too.
If you have zerks on your classic car, you should know that you’ll need to grease them whenever you complete an oil change. Sometimes they do not want to take the grease, so Brent Ackley recommends using zerk busters. See how helpful these handy helpers can be for classic cars. Zerk Busters can be found…Watch Now >>
Craig Hopkins teaches you how to create a plug weld while installing a floorpan. You will need to make sure the top pan is dropped all the way down tight on the base metal of the car. It is essential when clamping that you make it both tight and right next to the weld. You…Watch Now >>
George Vondriska introduces you to the combination impact wrench and wheel torque extension, which ranges from 55 pounds of torque to 140 pounds of torque. You will learn how to get a perfectly consistent torque throughout by using a cross pattern technique.Watch Now >>