Craig Hopkins quickly teaches you how to use a clamp and a rubber mallet to remove an emergency brake cable from its holding in the floor of a car body.
George Vondriska teaches you how to install two types of tire pressure monitors that will help you save your classic car, your money and possibly even your life. These are quick, simple fixes that screw on to the valve stems of the tire that you can buy at almost any car store. See how easy…Watch Now >>
Learn how to replace rotors with proper preparation of the rotors by greasing the wheel bearings prior to install. George Vondriska and Brent Ackley show you a way to grease the wheel bearings differently than the way you may be used to doing it. Also learn about a seal seat kit that helps seat the seal.Watch Now >>
Front disc brake conversions have become commonplace for many classic car enthusiasts. Mark Simpson takes us step-by-step through the process of installing an SSBC conversion kit on the front of our ’57 DeSoto project car. From removing all of the factory hardware to installing new brackets, rotors and calipers, you’ll see first hand how you…Watch Now >>
A flat tire can be a real pain and the time and money to have it fixed can be even worse, so George Vondriska shows you how to repair a flat without the hassle. If you follow his instructions and buy a simple tire plug repair kit, your classic car will be back on the road…Watch Now >>