Straightening and repairing aluminum trim pieces can seem like a daunting task, although many of the same skills and processes you use to refinish car body panels are also used when straightening trim. Mark Simpson demonstrates the process of removing dents and scratches and returning a luster to trim pieces by polishing aluminum.
Craig Hopkins uses a 3M polishing compound with a black foam pad to polish a classic car. and give it a stunning glass-like finish. Learn how to use Craig’s technique of barely brushing down on the edges to make sure you don’t cut the paint. Use these helpful car detailing tips today and see how…Watch Now >>
Because classic muscle cars are usually older, their owners typically have to replace bolts more often than those of modern cars. Mark Oja teaches you two ways to do so, with one being more costly than the other. Once you determine that the bolts you removed are correct, Mark suggests buying a complete bolt replacement…Watch Now >>
Craig Hopkins gives you different tips and tricks to help cut down the metal on a classic car panel without damaging the base. You must make sure to push the metal over weld, rather than attacking it, to avoid tearing the base metal. You will also learn how to get spot welds out. Use this…Watch Now >>
Craig Hopkins demonstrates how to sand a car fender using a small, tight orbit DA with a cushion pad. This allows for a nice flow rate that makes the sanding really smooth and gives the classic car a clean finish. Make sure to be just as careful Craig when sanding around the edges so you…Watch Now >>