In preparing for a complete restoration and upgrade, Craig and Aaron Hopkins get to work on cleaning out and taking inventory for a 1967 Chevy Chevelle. They walk you step by step through the entire cleaning process, which involves gutting the car’s interior components and sorting through the parts that should be recycled or trashed and those that can be salvaged and used in the upgrade.
-
15:42
Customize Your Own Classic Car With Sheet Metal Fabrication
In this video, learn how to customize your own classic car! Sheet Metal Fabrication can be a useful and effective tool when you are looking to add customized exterior to your classic car. Mark Oja works on a rare, custom Blown Fiat and adds his own custom hood using sheet metal fabrication made from cheap…
Watch Now >> -
2:13
Final Classic Car Restoration Tips
Craig Hopkins gives you some final classic car restoration tips to finish sanding, buffing, and polishing. You will learn how to run some tape along the edge of the quarter panel (and deck lid) to avoid cutting the paint. Also, all good paint jobs start with a good block. Craig recommends John Wheeler’s Adjustable Flexible…
Watch Now >> -
12:05
Classic Car Restoration: Cut-Down Techniques
Craig Hopkins gives you different tips and tricks to help cut down the metal on a classic car panel without damaging the base. You must make sure to push the metal over weld, rather than attacking it, to avoid tearing the base metal. You will also learn how to get spot welds out. Use this…
Watch Now >> -
3:34
Essential Car Tools
Craig Hopkins introduces the car tools you will need to install front sheet metal to your classic car. Some of the equipment you will need includes a ratcheting strap, screw driver, wrench, ratchet, sockets, hammer and pick bar. New hinges will also help make the hood fall in the same place every time.
Watch Now >>