Corey Bedortha teaches you how to install Hotchkis rear suspension performance parts in your classic car, demonstrating the process for putting in the bushings, spring mounts, rear shackles and multi-leaf springs. Remember, it is highly important that you apply enough silicone grease when necessary because it will make the car react much faster.
You Might Also Enjoy...
-
7:46Locating the Car Engine and Transmission Mounts
Brent Ackley and George Vondriska teach you how to locate the car engine and transmission mounts on a 1956 Chevrolet 150. They walk you through the step-by-step process, demonstrating essential classic car maintenance techniques, including lowering the motor into place, torquing the mounts, and welding the joints.
Watch Now >> -
3:35New Wheels and Tires for Classic Cars
Suspension is a good first step for improving the handling of a car, but Cam Benty explains how new, better wheels and tires for classic cars can make an even bigger difference. Cory installs the wheels and teaches you about an aspect you might have overlooked otherwise – alignment.
Watch Now >> -
13:42Replacing Classic Car Sway Bar Bushings
The first patent on a sway bar and sway bar bushings design came in Canada by Stephen Coleman in 1919. There wasn’t much call for it on early pre-war cars, as stiff suspension and body roll were simply viewed as part of the driving experience. Following World War II, roads had improved, cars were faster,…
Watch Now >> -
2:20Zerk Busters for Classic Cars
If you have zerks on your classic car, you should know that you’ll need to grease them whenever you complete an oil change. Sometimes they do not want to take the grease, so Brent Ackley recommends using zerk busters. See how helpful these handy helpers can be for classic cars. Zerk Busters can be found…
Watch Now >>
