Nobody likes an oil drip! George Vondriska shows you how to reach and replace the oil pan on a 1977 Chevy 454. Before recording the video, he drained the oil from the pan and removed the filter to get access to the oil filter adapter. Use these helpful tips presented to replace the oil pan gasket in your classic car efficiently!
-
0:59
Aligning Valve Cover Gaskets With Bolt Holes
Very rarely do the gasket holes line up with bolt holes when you are replacing valve cover gaskets. Brent Ackley teaches a helpful trick to properly align these holes. Use this method to make sure you have a good seal.
Watch Now >> -
4:09
Compression Test For Your Classic Car
George Vondriska and Brent Ackley teach you step-by-step how to do a compression test for your classic car. They show how to check the compression of each cylinder whether you are by yourself or with a partner. After analyzing the range of your compression results, you will know whether your engine is in good condition,…
Watch Now >> -
4:08
Classic Car Restoration: Setting the Dwell
Classic Car restoration is an exciting and hard working project. In this video, Brent Ackley shows you how to approximately position the points on a classic car’s engine, safely use the dwell meter and adjust the points for the perfect distance. One of the techniques can be done individually while the other needs a partner.
Watch Now >> -
1:48
Gapping the Points on Your Car Engine
George Vondriska teaches you how to find the correct gaps between points on your car engine. He starts by showing you how to create the largest gap possible between points. This will not give you the perfect gap, but allows for your classic car to run. Then, he teaches you how to maneuver the gaps to find the perfect…
Watch Now >>