Watch as Craig Hopkins and son Aaron install the car dash on their Chevelle. They also work on building the firewall from the inside out. Taking your time and working together is important so that everything fits correctly. Learn tips as they assemble the firewall complete with heater box and more.
Brent Ackley and George Vondriska walk you step-by-step through a classic car restoration process of bench soldering dashboard components for a 1956 Chevrolet 150, teaching you how to properly wire the components and connect the terminals. They show you a sample schematic for a standard component, and emphasize that each one will be different, so…Watch Now >>
It’s time to do the under dash wiring for the cruise control system. Brent Ackley recommends using the instruction manual to tell exactly which wires need to get tied to other wires. After the wiring is done, Brent installs the cruise control switch and shares why they chose the style that they did.Watch Now >>
Understanding engine timing and timing advance is important when making decisions on your classic car. Mark Simpson explains the difference between “Initial” timing and “Total” timing, and how to set and check both. Mark also demonstrates the use of a dial back timing light to accurately set timing advance.Watch Now >>
Proving that more can go wrong with a car sitting still than when it is driven regularly, components that are lubricated with 50 plus year old grease can often fail become inoperable. Mark Simpson digs into a vintage wiper motor to determine why it stopped working, then cleans, inspects and re-lubricates the windshield wiper motor…Watch Now >>