It’s time to do the under dash wiring for the cruise control system. Brent Ackley recommends using the instruction manual to tell exactly which wires need to get tied to other wires. After the wiring is done, Brent installs the cruise control switch and shares why they chose the style that they did.
You Might Also Enjoy
-
17:38Classic Car Clutch Replacement
If you hit the gas and your classic car goes “vroom, vroom”, but you’re still not moving, it’s time for a clutch replacement. Brent Ackley and George Vondriska show you how to take out the drive shaft and unbolt a majority of the transmission on your car’s engine to remove and replace the clutch.
Watch Now >> -
14:13How to Install a Cold Air Intake for your Car
Amir Rosenbaum teaches you the three aspects that you can utilize to add power to your car – fuel, spark and air. For a car’s performance, hot air is bad and cool air is good. Amir demonstrates how to install a cold air intake kit that adds 1% horsepower for every 10 degree drop in…
Watch Now >> -
8:09Replacing an Oil Pan Gasket
Nobody likes an oil drip! George Vondriska shows you how to reach and replace the oil pan on a 1977 Chevy 454. Before recording the video, he drained the oil from the pan and removed the filter to get access to the oil filter adapter. Use these helpful tips presented to replace the oil pan…
Watch Now >> -
2:441977 El Camino Project Car
Brent Ackley and George Vondriska have a new project to work on, a 1977 El Camino. Mechanically the El Camino is in good shape but the body is in poor shape. The body is what they plan to focus on. Brent and George will be providing lessons on how to work around the fact that you can’t readily find body parts…
Watch Now >>
