Brent Ackley teaches you how to correctly install a distributor into the engine of a 1956 Chevrolet 150, walking you step by step through the process and demonstrating the essential classic car maintenance tips and techniques you’ll need to utilize. He shows the proper method for opening the intake valves in order to drop in the distributor and prepare the fuel system for startup.
You Might Also Enjoy...
-
3:59Putting Spark Plugs Back Into the Engine
George Vondriska and Brent Ackley explain how to put spark plugs back into the engine by finding the correct gap and gapping the plug. They also cover the diagnostics of a spark plug before putting it back into your classic car. They give multiple examples of bad spark plugs, discuss what is wrong with them…
Watch Now >> -
8:09Replacing an Oil Pan Gasket
Nobody likes an oil drip! George Vondriska shows you how to reach and replace the oil pan on a 1977 Chevy 454. Before recording the video, he drained the oil from the pan and removed the filter to get access to the oil filter adapter. Use these helpful tips presented to replace the oil pan…
Watch Now >> -
2:441977 El Camino Project Car
Brent Ackley and George Vondriska have a new project to work on, a 1977 El Camino. Mechanically the El Camino is in good shape but the body is in poor shape. The body is what they plan to focus on. Brent and George will be providing lessons on how to work around the fact that you can’t readily find body parts…
Watch Now >> -
17:38Classic Car Clutch Replacement
If you hit the gas and your classic car goes “vroom, vroom”, but you’re still not moving, it’s time for a clutch replacement. Brent Ackley and George Vondriska show you how to take out the drive shaft and unbolt a majority of the transmission on your car’s engine to remove and replace the clutch.
Watch Now >>
