George Vondriska teaches you how to install a new wiring harness under the dashboard of a 1956 Chevrolet 150. He demonstrates each of the essential classic car maintenance tips and techniques you’ll use, including the mounting and wiring of the fuse board.
You Might Also Enjoy...
-
2:18Upgrade: Aftermarket Cruise Control by Dakota Digital
George Vondriska and Brent Ackley give a cruise control update overview. They have a kit from Dakota Digital that allows them to add aftermarket cruise control to the 56 Chevy. There are many little parts but you’ll learn that it is not too difficult to install.
Watch Now >> -
2:57Diagnosing Problems with a Vacuum Gauge
A vacuum gauge is a valuable tool in diagnosing problems with your car. From poor performance to bad braking, the vacuum gauge can help you find the root of many problems. Mark Simpson demonstrates how to perform an accurate engine vacuum test.
Watch Now >> -
9:33Install a Cruise Control Speed Sensor and Module
Watch Brent Ackley install a cruise control speed sensor and module on the 56 Chevy. Next, Brent and George Vondriska work under the hood. See how the cruise module goes in and how they connect into the linkage on the existing carburetor.
Watch Now >> -
5:46Car Dash and Firewall Installation
Watch as Craig Hopkins and son Aaron install the car dash on their Chevelle. They also work on building the firewall from the inside out. Taking your time and working together is important so that everything fits correctly. Learn tips as they assemble the firewall complete with heater box and more.
Watch Now >>
