To conclude the repairs made on Brent Ackley’s 1966 Buick Skylark, he and George Vondriska need to make a final inspection. They briefly cover everything under the hood from the direction of the gas filter to the transparency of the air cleaner to proper heater and radiator hoses. They’ll help you make sure the general condition of your engine compartment is functioning properly and that your classic car is running at its peak performance.
Tags: Premium Videos
You Might Also Enjoy...
-
0:59Very rarely do the gasket holes line up with bolt holes when you are replacing valve cover gaskets. Brent Ackley teaches a helpful trick to properly align these holes. Use this method to make sure you have a good seal.
Watch Now >> -
4:09George Vondriska and Brent Ackley teach you step-by-step how to do a compression test for your classic car. They show how to check the compression of each cylinder whether you are by yourself or with a partner. After analyzing the range of your compression results, you will know whether your engine is in good condition,
Watch Now >> -
4:32If you have missing heat shields or notice spark plugs lying against the exhaust manifold, you should probably replace your spark plug wires. If you are unsure whether you need to, Brent Ackley will help you examine your valve cover and other parts to double check. After watching this video, you will know how to
Watch Now >> -
17:38If you hit the gas and your classic car goes “vroom, vroom”, but you’re still not moving, it’s time for a clutch replacement. Brent Ackley and George Vondriska show you how to take out the drive shaft and unbolt a majority of the transmission on your car’s engine to remove and replace the clutch.
Watch Now >>
