Learn how to replace master cylinder assemblies and install a new one in this Classic Car video. George Vondriska and Brent Ackley take you step by step through the process. Also watch Brent begin to install new brake lines.
George Vondriska explains that malfunctioning cruise control comes from a broken brake switch and it can be a real cheap and easy fix as long as you know you way around a dashboard. Use these helpful tips provided in this video to go through a brake switch replacement for your classic car with ease!Watch Now >>
Bleeding the master cylinder can be done with it in the car but it would take a long time to get all the air worked out. Brent Ackley shows you how to bench bleed a master cylinder by using bleeding ports, attaching little hoses and adding brake fluid. Last step is pumping the actuating rod…Watch Now >>
Join the team at Tin Man Fabrication as we upgrade a 1967 Ford Mustang to Wilwood front disc brakes and install an Ididit tilt steering column. Hot rod mechanic Jim Koncker, takes us step-by-step through the process of upgrading to Wilwood performance front disc brakes, including: tear down, hub assembly, packing bearings, bracket installation and…Watch Now >>
Learn how to replace rotors with proper preparation of the rotors by greasing the wheel bearings prior to install. George Vondriska and Brent Ackley show you a way to grease the wheel bearings differently than the way you may be used to doing it. Also learn about a seal seat kit that helps seat the seal.Watch Now >>