Brent Ackley and George Vondriska teach you how to replace rear shocks, in this case on the El Camino. They walk you step by step through the removal and installation process, demonstrating the essential maintenance tips and techniques you’ll utilize when doing this yourself. Learn the difference between air shocks and air bags and determine which is right for your vehicle.
It is time to do the body drop and perform the final steps for finishing the 1967 Chevy Chevelle. Craig and Aaron Hopkins take their time to make sure it all goes smoothly as Craig walks you through the process. He shares that a twin post hoist is probably the best investment you’ll ever make inWatch Now >>
Brent Ackley repacks the wheel bearings on his 1966 Buick Skylark to inspect them for wear and damage. He removes the dust cover, cotter key and castle nut to teach you how to take out both the inner and outer bearings for cleaning and then examine and repack them.Watch Now >>
Corey Bedortha teaches you how to safely remove the parts of the stock rear suspension in your classic car, including how to take out the old shocks, rear shackle and leaf springs that will be replaced with new u-bolts. Be careful around the parking brake cable, because without it you’ll be down the road without…well…brakes.Watch Now >>
Weak rear control arms are a common problem for GM A-Body cars (Chevelle, GTO, Cutlass, Gran Sport). This problem is especially noticeable on high horsepower cars. For years the backyard garage solution was to add boxing plates welded to the open channel in the control arm, but times change and aftermarket control arms offer bothWatch Now >>