Watch Brent Ackley install a cruise control speed sensor and module on the 56 Chevy. Next, Brent and George Vondriska work under the hood. See how the cruise module goes in and how they connect into the linkage on the existing carburetor.
You Might Also Enjoy...
-
17:09U-Joint Replacement For a Classic Car
You’re probably well aware that hearing a “clunk” sound when shifting your car into gear is never good, but did you know that it typically means you may need a U-Joint replacement? Brent Ackley discusses the bearings that are causing this problem and shows how to replace them.
Watch Now >> -
4:32How to Replace Spark Plug Wires
If you have missing heat shields or notice spark plugs lying against the exhaust manifold, you should probably replace your spark plug wires. If you are unsure whether you need to, Brent Ackley will help you examine your valve cover and other parts to double check. After watching this video, you will know how to…
Watch Now >> -
0:59Aligning Valve Cover Gaskets With Bolt Holes
Very rarely do the gasket holes line up with bolt holes when you are replacing valve cover gaskets. Brent Ackley teaches a helpful trick to properly align these holes. Use this method to make sure you have a good seal.
Watch Now >> -
4:06Overview of the Rebuilt 350 Classic Car Engine
Brent Ackley gives you an overview of a rebuilt 350 4 Bolt Main classic car engine that can run pump gas and now has 325-350 HP. He starts by sending the engine to the auto shop for close cleaning, measuring, and overall renewal.
Watch Now >>
