Most people get oil changes regularly because it shows up in that neon light on the dashboard, but they often forget about changing the transmission fluid, filter and gasket. Fortunately, you will find the fluid and filter can be done simultaneously, which makes it a manageable process after an oil change. In this video, learn several helpful techniques for making the transmission fluid change process quick and easy.
You Might Also Enjoy
-
4:09Compression Test For Your Classic Car
George Vondriska and Brent Ackley teach you step-by-step how to do a compression test for your classic car. They show how to check the compression of each cylinder whether you are by yourself or with a partner. After analyzing the range of your compression results, you will know whether your engine is in good condition,…
Watch Now >> -
17:38Classic Car Clutch Replacement
If you hit the gas and your classic car goes “vroom, vroom”, but you’re still not moving, it’s time for a clutch replacement. Brent Ackley and George Vondriska show you how to take out the drive shaft and unbolt a majority of the transmission on your car’s engine to remove and replace the clutch.
Watch Now >> -
0:59Aligning Valve Cover Gaskets With Bolt Holes
Very rarely do the gasket holes line up with bolt holes when you are replacing valve cover gaskets. Brent Ackley teaches a helpful trick to properly align these holes. Use this method to make sure you have a good seal.
Watch Now >> -
4:01Classic Car Maintenance Tips: Timing the Engine
Brent Ackley teaches you how to correctly install a distributor into the engine of a 1956 Chevrolet 150, walking you step by step through the process and demonstrating the essential classic car maintenance tips and techniques you’ll need to utilize. He shows the proper method for opening the intake valves in order to drop in…
Watch Now >>
