Brent Ackley repacks the wheel bearings on his 1966 Buick Skylark to inspect them for wear and damage. He removes the dust cover, cotter key and castle nut to teach you how to take out both the inner and outer bearings for cleaning and then examine and repack them.
Brent Ackley and George Vondriska are back working on the 1956 Chevrolet 150. Today they are working on a steering column upgrade. Watch and learn how to replace a steering column as they get the old column out and the steps they go through to re-install a new one. Every car is different so following…Watch Now >>
Roadways across America were much different in the seventies and earlier than they are today. To compensate for rough roads and uneven pavement manufacturers gave their cars plenty of ground clearance, however today this elevated stance seems to rival that of most four wheel drive trucks. A popular conversion to give cars a more modern…Watch Now >>
Corey Bedortha teaches you how to safely remove the parts of the stock rear suspension in your classic car, including how to take out the old shocks, rear shackle and leaf springs that will be replaced with new u-bolts. Be careful around the parking brake cable, because without it you’ll be down the road without…well…brakes.Watch Now >>
Weak rear control arms are a common problem for GM A-Body cars (Chevelle, GTO, Cutlass, Gran Sport). This problem is especially noticeable on high horsepower cars. For years the backyard garage solution was to add boxing plates welded to the open channel in the control arm, but times change and aftermarket control arms offer both…Watch Now >>