In this video, it’s time to get the body on the Chassis. In one afternoon, the team puts the headliner and vinyl top on the car and also sets the glass in it. Both the headliner and top are original materials which really make the car look sharp!
Corey Bedortha teaches you how to install Hotchkis rear suspension performance parts in your classic car, demonstrating the process for putting in the bushings, spring mounts, rear shackles and multi-leaf springs. Remember, it is highly important that you apply enough silicone grease when necessary because it will make the car react much faster.Watch Now >>
Brent Ackley and George Vondriska are back working on the 1956 Chevrolet 150. Today they are working on a steering column upgrade. Watch and learn how to replace a steering column as they get the old column out and the steps they go through to re-install a new one. Every car is different so following…Watch Now >>
If you have zerks on your classic car, you should know that you’ll need to grease them whenever you complete an oil change. Sometimes they do not want to take the grease, so Brent Ackley recommends using zerk busters. See how helpful these handy helpers can be for classic cars. Zerk Busters can be found…Watch Now >>
Corey Bedortha teaches you how to safely remove the parts of the stock rear suspension in your classic car, including how to take out the old shocks, rear shackle and leaf springs that will be replaced with new u-bolts. Be careful around the parking brake cable, because without it you’ll be down the road without…well…brakes.Watch Now >>