Converting the coating on your bright zinc plated nuts and bolts to a yellow cadmium or black oxide look is a lot easier with some great products available from Caswell Inc.
Tags: bolts, Caswell, Member Videos, nuts, Premium Videos, tools
You Might Also Enjoy...
-
2:44Brent Ackley and George Vondriska have a new project to work on, a 1977 El Camino. Mechanically the El Camino is in good shape but the body is in poor shape. The body is what they plan to focus on. Brent and George will be providing lessons on how to work around the fact that you can’t readily find body parts
Watch Now >> -
0:59Very rarely do the gasket holes line up with bolt holes when you are replacing valve cover gaskets. Brent Ackley teaches a helpful trick to properly align these holes. Use this method to make sure you have a good seal.
Watch Now >> -
17:38If you hit the gas and your classic car goes “vroom, vroom”, but you’re still not moving, it’s time for a clutch replacement. Brent Ackley and George Vondriska show you how to take out the drive shaft and unbolt a majority of the transmission on your car’s engine to remove and replace the clutch.
Watch Now >> -
2:24George Vondriska teaches how to use a pressurized device to test the performance of your classic car’s radiator system and radiator cap to prevent the parts from leaking. Also see how this technique prevents the engine of your classic car from overheating.
Watch Now >>
