Amir Rosenbaum teaches you the three aspects that you can utilize to add power to your car – fuel, spark and air. For a car’s performance, hot air is bad and cool air is good. Amir demonstrates how to install a cold air intake kit that adds 1% horsepower for every 10 degree drop in temperature. You’ll notice a significant increase in power!
You Might Also Enjoy
-
17:38Classic Car Clutch Replacement
If you hit the gas and your classic car goes “vroom, vroom”, but you’re still not moving, it’s time for a clutch replacement. Brent Ackley and George Vondriska show you how to take out the drive shaft and unbolt a majority of the transmission on your car’s engine to remove and replace the clutch.
Watch Now >> -
14:12Classic Car Engine Assembly
Brent Ackley teaches you how to properly assemble a classic car engine at your own pace, with in-depth instructions for installing the crank and cam shafts, inserting the main oil bearings, assembling and removing the pistons and putting the timing cover on.
Watch Now >> -
17:09U-Joint Replacement For a Classic Car
You’re probably well aware that hearing a “clunk” sound when shifting your car into gear is never good, but did you know that it typically means you may need a U-Joint replacement? Brent Ackley discusses the bearings that are causing this problem and shows how to replace them.
Watch Now >> -
8:09Replacing an Oil Pan Gasket
Nobody likes an oil drip! George Vondriska shows you how to reach and replace the oil pan on a 1977 Chevy 454. Before recording the video, he drained the oil from the pan and removed the filter to get access to the oil filter adapter. Use these helpful tips presented to replace the oil pan…
Watch Now >>
