Rodents just seem attracted to classic cars, perhaps it’s the all-natural materials used in older interiors, or the wealth of little areas to sneak in, or perhaps it’s just a nice enclosed area to spend the winter undisturbed. If you own classic cars long enough, sooner or later these pesky creatures will visit you too. The best offense though is a good defense, and Mark Simpson explores building a solid game plan to win this battle. Scents, traps, sound and poison can all help build a wall between them and your car. Taking the right steps in how your car is stored can also keep them from ever getting close. Check out how to keep mice out of your car.
Tags: car exterminating, classic car repair, classic car tips, hot rod repair videos, keeping rodents out of your car, Mark Simpson, Member Videos
You Might Also Enjoy...
-
2:02Add the finishing touches to your full car floor installation with Craig Hopkins. He tells you that the plug welds don’t necessarily have to be ground down, but if you’re going to what tools to use. He uses a cut off wheel with a 3/8th wide rock and 3 inch angle grinder with a 36
Watch Now >> -
3:24Craig Hopkins covers the three types of welding basics. He teaches you how to stabilize, distance, and consistently push the bead in a lap weld. For a plug weld, you will learn to start outside the circle and bring it in just licking the edges. Lastly, the butt weld will teach you to move the
Watch Now >> -
1:12Craig Hopkins quickly teaches you how to use a clamp and a rubber mallet to remove an emergency brake cable from its holding in the floor of a car body.
Watch Now >> -
0:59Very rarely do the gasket holes line up with bolt holes when you are replacing valve cover gaskets. Brent Ackley teaches a helpful trick to properly align these holes. Use this method to make sure you have a good seal.
Watch Now >>
