LED replacement bulbs have become commonplace in the classic car marketplace. Mark Simpson discusses some of the options available and the steps you’ll need to take for your system to operate properly.
New windlace installation is an important first step in reupholstering your classic car. Mark Simpson explains the importance of having good windlace and shows us the materials and supplies you’ll need to accomplish this job. Then classic car upholsterer Gary Simpson takes us step-by-step through the process of installation. Including, how to deal with uniqueWatch Now >>
Craig Hopkins demonstrates how to replace front fender patch on a 1970 Chevelle. Hear why Craig says it’s better to apply patch panels directly to the body of the car rather than patching and then welding the repaired panel onto the car. Go step-by-step with Craig and get a recap of all of the patchWatch Now >>
Craig Hopkins teaches you how to create a plug weld while installing a floorpan. You will need to make sure the top pan is dropped all the way down tight on the base metal of the car. It is essential when clamping that you make it both tight and right next to the weld. YouWatch Now >>
Craig Hopkins introduces the car tools you will need to install front sheet metal to your classic car. Some of the equipment you will need includes a ratcheting strap, screw driver, wrench, ratchet, sockets, hammer and pick bar. New hinges will also help make the hood fall in the same place every time.Watch Now >>