Craig Hopkins uses a 3M polishing compound with a black foam pad to polish a classic car. and give it a stunning glass-like finish. Learn how to use Craig’s technique of barely brushing down on the edges to make sure you don’t cut the paint. Use these helpful car detailing tips today and see how quickly you can enhance your classic car.
You Might Also Enjoy...
-
17:29How to Fix Small Dents on Your Classic Car
Do you hate that little dent on your classic car that you have no idea how it got there? Mark Oja teaches you how to fix small dents on your classic car in this video. Also, find out about the techniques and materials you’ll need to remove those unsightly dings from your classic car for…
Watch Now >> -
0:56Replacing Bolts on Classic Muscle Cars
Because classic muscle cars are usually older, their owners typically have to replace bolts more often than those of modern cars. Mark Oja teaches you two ways to do so, with one being more costly than the other. Once you determine that the bolts you removed are correct, Mark suggests buying a complete bolt replacement…
Watch Now >> -
1:04How to Sharpen a Chisel
Craig Hopkins teaches you how to sharpen a chisel on a bench grinder with ease in this video. To get a single edge chisel, you simply lay it on the stone and create a sharp edge and a cup.
Watch Now >> -
3:30Trial Fitting on the Classic Car Quarter Panel
Since you will butt weld the new quarter panel to the roof and existing quarter panel, Craig Hopkins teaches you how to remove a quarter of an inch from the roof without cutting through the existing car quarter panel. Then, he’ll apply some weld through primer to the step you just created and rest the…
Watch Now >>
