Enjoying your car on the road and at car shows is why we build them; while it’s important they look good, it’s more important that they are safe to drive. Mark Simpson takes us through the key components of a car safety inspection and important safety features you should be incorporating.
You Might Also Enjoy...
-
5:20Removing Hardware from a Car Body
When stripping the hardware from a car, it is important that you take the necessary precautions to carefully remove each component. Craig Hopkins teaches you how to use a torch and a few hand tools to find and remove screws and other materials that are holding the hardware onto the body of the car. The…
Watch Now >> -
0:59Aligning Valve Cover Gaskets With Bolt Holes
Very rarely do the gasket holes line up with bolt holes when you are replacing valve cover gaskets. Brent Ackley teaches a helpful trick to properly align these holes. Use this method to make sure you have a good seal.
Watch Now >> -
4:48Replacing Exhaust Studs
If you work on classic cars long enough, sooner or later you’ll need to remove rusted exhaust studs. Mark Simpson explains the process to safely remove them using a stud extractor tool and quality penetrating fluids. He also explains the process to properly use heat to release rusted studs.
Watch Now >> -
2:45An Easy Out for Classic Car Repairs
If you have ever gotten a bolt stuck in your classic car, you want to know how to use an EASY OUT. Brent Ackley shows you the slow, deliberate process so you can avoid making the expensive and time-costly mistake of having to repair a broken bolt. See how this technique helps avoid the need to…
Watch Now >>
