Mark Simpson demonstrates how adding and properly maintaining an at-home media blasting cabinet can dramatically improve the quality of your restorations. He shows exactly what steps you need to know to: maintain the consumable parts, selecting blasting media, safety considerations, preparing parts for blasting and how to protect the parts you don’t want blasted.
The Bead Roller is a handy tool that provides extra strength by adding ridges to your sheet metal. Mark Oja and Cam Benty demonstrate how to use a Bead Roller on your classic car to add a little extra flair and strength to any metal you have.Watch Now >>
One of the important first steps in TIG (Tungsten Inert Gas) welding, is to know the differences between tungsten electrodes, how to properly cut them shorter if needed and how to properly sharpen them before installing them into the welding torch. Professional hot rod fabricator and welder, Gary Simpson explains the differences and what you’ll…Watch Now >>
A sheet metal shrinker/stretcher is perfect for any type of metal fabrication you need for your classic car, and it keeps the metal completely flat (without crimps). Mark Oja gives a brief demonstration on how the stretcher works and then shows you an example of a finished product.Watch Now >>
Craig Hopkins provides helpful insight into the different types of welders available. He helps you decide what type of welder to buy by reviewing a 110 tap unit and a 220V 175 gas shielded unit. He recommends the 220V unit over the 210V, but discusses how both will get the job done. Just don’t get…Watch Now >>