If you’re restoring a car, sooner or later you’re going to need to paint various nuts and bolts. Here’s a tip to help you keep everything under control.
You Might Also Enjoy
-
1:16Review and Using Weld Through Primer
Craig Hopkins gives a review of his preferred weld through primer – Medallions rubberseal RS512. He claims this is the best weld through primer he has ever used despite what others say. See how to apply a thin coat to the bottom of the panel.
Watch Now >> -
3:28Safe Jacking Tips and Tricks for Your Classic Car
Mark Oja gives you a brief background on why safety is so important when jacking up your classic car. It is essential that you take the necessary precautions and use a proper jack, jack stands, and other general equipment.
Watch Now >> -
0:59Aligning Valve Cover Gaskets With Bolt Holes
Very rarely do the gasket holes line up with bolt holes when you are replacing valve cover gaskets. Brent Ackley teaches a helpful trick to properly align these holes. Use this method to make sure you have a good seal.
Watch Now >> -
2:28Window Trim Fuzzy Fix
Learn a few helpful tips for fixing a fuzzy window trim piece. Craig Hopkins demonstrates the little things that can be done to help make the window trim lay in the car better. Not only will it make the car look cool, it also helps with the side glass.
Watch Now >>
Good to know