The art of metal straightening involves using numerous precision ground hammers and dollies. Mark Simpson shows you how to protect your investment in tools by preventing rust and buildup on the face of the tools.
Craig Hopkins gives you different tips and tricks to help cut down the metal on a classic car panel without damaging the base. You must make sure to push the metal over weld, rather than attacking it, to avoid tearing the base metal. You will also learn how to get spot welds out. Use thisWatch Now >>
Do you hate that little dent on your classic car that you have no idea how it got there? Mark Oja teaches you how to fix small dents on your classic car in this video. Also, find out about the techniques and materials you’ll need to remove those unsightly dings from your classic car forWatch Now >>
Since you will butt weld the new quarter panel to the roof and existing quarter panel, Craig Hopkins teaches you how to remove a quarter of an inch from the roof without cutting through the existing car quarter panel. Then, he’ll apply some weld through primer to the step you just created and rest theWatch Now >>
Craig Hopkins explains how to sand a car with a paint stick around the edges without making a flat spot. He uses the water blade to distinguish where to sand more and where not to over sand. You will get an up close look on how to properly sand every difficult area, crease, and edge.Watch Now >>