It is time to learn how to apply body filler to your classic car! Craig Hopkins is in the garage working on his ’67 Chevelle and walks through the process of applying body fillers. See what kind of filler he starts with and find out the reasons why he begins with that product. Learn how to apply it correctly to ensure a strong foundation and then go through the process of applying quantum body filler!
Craig Hopkins gives you different tips and tricks to help cut down the metal on a classic car panel without damaging the base. You must make sure to push the metal over weld, rather than attacking it, to avoid tearing the base metal. You will also learn how to get spot welds out. Use thisWatch Now >>
A sheet metal shrinker/stretcher is perfect for any type of metal fabrication you need for your classic car, and it keeps the metal completely flat (without crimps). Mark Oja gives a brief demonstration on how the stretcher works and then shows you an example of a finished product.Watch Now >>
Craig Hopkins provides helpful tips for restoring a classic car in this video. He explains that it is imperative the doors on a classic car are lined up before installing the fenders because that’s what the fenders are going to fit. The control bolt will then set the height of fender to height of doorWatch Now >>
Craig Hopkins explains how to sand a car with a paint stick around the edges without making a flat spot. He uses the water blade to distinguish where to sand more and where not to over sand. You will get an up close look on how to properly sand every difficult area, crease, and edge.Watch Now >>