The time has come to weld the patch to the body of the car. Watch as Craig Hopkins welds the body patch panel just behind the driver’s door on this old Chevy. See some of the tricks and techniques Craig uses as he puts the patch panel set in place. Craig makes sure to give a mini-welding safety refresher course, too.
You Might Also Enjoy
-
17:29How to Fix Small Dents on Your Classic Car
Do you hate that little dent on your classic car that you have no idea how it got there? Mark Oja teaches you how to fix small dents on your classic car in this video. Also, find out about the techniques and materials you’ll need to remove those unsightly dings from your classic car for…
Watch Now >> -
8:49How to Sand a Car: DA Sanding
Craig Hopkins demonstrates how to sand a car fender using a small, tight orbit DA with a cushion pad. This allows for a nice flow rate that makes the sanding really smooth and gives the classic car a clean finish. Make sure to be just as careful Craig when sanding around the edges so you…
Watch Now >> -
3:30Trial Fitting on the Classic Car Quarter Panel
Since you will butt weld the new quarter panel to the roof and existing quarter panel, Craig Hopkins teaches you how to remove a quarter of an inch from the roof without cutting through the existing car quarter panel. Then, he’ll apply some weld through primer to the step you just created and rest the…
Watch Now >> -
2:13Final Classic Car Restoration Tips
Craig Hopkins gives you some final classic car restoration tips to finish sanding, buffing, and polishing. You will learn how to run some tape along the edge of the quarter panel (and deck lid) to avoid cutting the paint. Also, all good paint jobs start with a good block. Craig recommends John Wheeler’s Adjustable Flexible…
Watch Now >>
