Craig Hopkins walks you through the complete process for removing the old roof structure (headers, siders, drip rail, etc.) from a 1967 Chevy Chevelle and the preparations for installing the structure from a donor car. It is important that you take your time in order to only cut away what you need prior to installing the new structure.
-
18:30
How to Sand a Car: Hand Sanding
Craig Hopkins explains how to sand a car with a paint stick around the edges without making a flat spot. He uses the water blade to distinguish where to sand more and where not to over sand. You will get an up close look on how to properly sand every difficult area, crease, and edge.
Watch Now >> -
7:41
Classic Car Polishing Preparation
Craig Hopkins prepares you to polish your classic car with 1000, 1500, and 3000 grit sandpaper without scratching the paint, and then shows you the sanding technique with paint sticks, blocks, and a water blade to get the perfect finish. Make sure all of your equipment is clean!
Watch Now >> -
2:10
Classic Car Sanding Supplies in Your Shop
Sanding is a critical step in adding an impressive paint job to your classic car, so you need the proper supplies in your shop. Cam Benty helps you choose what size blocks to use, how to build your own block and the functions of a powder can. A proper finish starts with the car sanding…
Watch Now >> -
9:32
Classic Car Quarter Panel Final and Welding
Craig Hopkins runs down a checklist on how a car quarter panel should fit on your classic car, including using plenty of clamps and securing it with a final welding and rock grinder to level it out for a perfect repair.
Watch Now >>