Craig Hopkins continues working on his Chevelle while taking you through the process of skinning a door. Find out what it takes to skin a door properly! Learn specific skinning techniques that work best for car doors that are rusted out or have accident damage to it. Start skinning a door while utilizing these helpful tips and techniques provided.
You Might Also Enjoy
-
5:24Installing an Air Dam in a Classic Car
For most classic cars, an air dam is used to help the car breathe better, but Mark Oja uses one on his GT 500 to make it look even cooler. Whatever your purpose, this video will teach you how to install an air dam into a classic car.
Watch Now >> -
2:10Classic Car Sanding Supplies in Your Shop
Sanding is a critical step in adding an impressive paint job to your classic car, so you need the proper supplies in your shop. Cam Benty helps you choose what size blocks to use, how to build your own block and the functions of a powder can. A proper finish starts with the car sanding…
Watch Now >> -
7:41Classic Car Polishing Preparation
Craig Hopkins prepares you to polish your classic car with 1000, 1500, and 3000 grit sandpaper without scratching the paint, and then shows you the sanding technique with paint sticks, blocks, and a water blade to get the perfect finish. Make sure all of your equipment is clean!
Watch Now >> -
12:05Classic Car Restoration: Cut-Down Techniques
Craig Hopkins gives you different tips and tricks to help cut down the metal on a classic car panel without damaging the base. You must make sure to push the metal over weld, rather than attacking it, to avoid tearing the base metal. You will also learn how to get spot welds out. Use this…
Watch Now >>
