After removing the old roof structure from a 1967 Chevy Chevelle, you only have one option: put the new on! Craig Hopkins teaches you how to position the structure in place and use clamps and a crowbar to get the roof properly pieced together prior to welding. The guys then show you the technique for completing spot and mig welds.
You Might Also Enjoy
-
18:30How to Sand a Car: Hand Sanding
Craig Hopkins explains how to sand a car with a paint stick around the edges without making a flat spot. He uses the water blade to distinguish where to sand more and where not to over sand. You will get an up close look on how to properly sand every difficult area, crease, and edge.
Watch Now >> -
3:30Trial Fitting on the Classic Car Quarter Panel
Since you will butt weld the new quarter panel to the roof and existing quarter panel, Craig Hopkins teaches you how to remove a quarter of an inch from the roof without cutting through the existing car quarter panel. Then, he’ll apply some weld through primer to the step you just created and rest the…
Watch Now >> -
1:28Sheet Metal Shrinker/Stretcher For Your Classic Car
A sheet metal shrinker/stretcher is perfect for any type of metal fabrication you need for your classic car, and it keeps the metal completely flat (without crimps). Mark Oja gives a brief demonstration on how the stretcher works and then shows you an example of a finished product.
Watch Now >> -
5:18Project Car Buying Advice
Buying a car to restore may not be as stressful as looking for a new project car, but there are still important aspects to look for. Brent Ackley tells you what areas to examine to get the finished product you desire depending on how much money you want to spend and the amount of time…
Watch Now >>
