Craig Hopkins talks about different specialty classic car repair tools such as an air chisel and grinder, a drill, a hammer and dolly, a dusk mask, gloves, and ear protection that will help improve the car and keep you safe.
Craig Hopkins demonstrates how to sand a car fender using a small, tight orbit DA with a cushion pad. This allows for a nice flow rate that makes the sanding really smooth and gives the classic car a clean finish. Make sure to be just as careful Craig when sanding around the edges so you…Watch Now >>
Craig Hopkins gives you some final classic car restoration tips to finish sanding, buffing, and polishing. You will learn how to run some tape along the edge of the quarter panel (and deck lid) to avoid cutting the paint. Also, all good paint jobs start with a good block. Craig recommends John Wheeler’s Adjustable Flexible…Watch Now >>
Craig Hopkins provides helpful tips for restoring a classic car in this video. He explains that it is imperative the doors on a classic car are lined up before installing the fenders because that’s what the fenders are going to fit. The control bolt will then set the height of fender to height of door…Watch Now >>
Buying a car to restore may not be as stressful as looking for a new project car, but there are still important aspects to look for. Brent Ackley tells you what areas to examine to get the finished product you desire depending on how much money you want to spend and the amount of time…Watch Now >>